Larry's Marine Center
5007 Lakeshore Drive,
Wichita Falls TX, 76310
Tel:940-692-5450
Mako 214 CC - main image

2020 Mako 214 CC

Year 2020
Length 21'5 ft

With its wave-crushing Deep V hull and interior creature comforts, the MAKO® 214 CC is the ideal balance of fishing performance and family happiness. Bow wrap-around, forward console and aft bench seating adds comfort for family and friends, and the optional deck filler adds a forward lounge area.

The versatile 214 CC is overbuilt for safety and comfort, riding on the legendary MAKO deep v hull, which dominates chop with its aggressive deadrise and throws down spray with its reverse chines resulting in a smooth, dry, and secure ride. All this, and it's backed by the best factory warranty in saltwater boats—MAKO Assurance 5+Life.

Specifications

Year Built 2020
Category Power
Length Overall 21'5 ft
Beam 8'6 ft
Max Draft 1'2 ft
Number of Passengers 10
Construction Fiberglass
Deadrise Angle 18 °
Engines 1
Fuel Tanks 1
Fuel Tank Cap. 91 gal
Dry Weight 3,735 lb

Engine 1 Specifications

Type: Outboard
Additional Specs
  • Length:21' 5"
  • Beam: 8' 6"
  • Bottom width: 6' 7.5"
  • Max. recommended HP: 250 HP
  • Fuel capacity: 91 gal.
  • Max. person capacity: 10 persons
  • Max. person weight: 1700 lbs.
  • Max. person, motor & gear weight: 2550 lbs.
  • Interior depth: 27"
  • Transom height at center line: 25"
  • Deadrise: 18 degrees
  • Draft: 14"
  • Dry weight: 3735 lbs.
  • Average hull weight: 3100 lbs.
  • Average package weight: 4535 lbs.
  • Package height: 9' 3"
  • Package height w/T-top or hardtop: 11' 2"
  • Storage length: 30' 8"
Standard Features

Certification & Safety

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Stainless steel hardware & fasteners for corrosion resistance
  • Horn
  • Flush-mounted Ritchie Navigation® Voyager compass

Console

  • Custom anodized aluminum steering wheel w/knob
  • Binnacle-mounted motor control(s)
  • NEW Mercury® SmartCraft® digital gauges
  • Heavy-duty electrical switching system w/battery selector switch(es)
  • Switch panel w/manual reset circuit breakers & illuminated switches
  • Easy access to helm electronics, instruments & switches
  • FUSION stereo w/4 speakers
  • Removable forward-console seat w/72-qt. (68.14 L) insulated, drained cooler
  • Integrated full-width footrest
  • Acrylic windscreen
  • Marine-grade tinned wiring w/submersible connectors
  • Lockable, sealed glovebox
  • Extra-large electronics mounting surface
  • 2 console drink holders
  • 12V DC outlet

Leaning Post

  • Anodized aluminum leaning post
  • Helm seat w/flip-up cushion
  • Storage below seat
  • Space below leaning post for optional cooler
  • Rod holders

T-Top or Hardtop

  • Canvas T-top
  • Aft spreader lights
  • .25" (.64 cm) aluminum backing-plate reinforcement for T-top
  • Electronics box

Head

  • Head enclosure/storage space w/stainless steel latch
  • Wiring access hatch & battery access
  • Main distribution panel inside head
  • Courtesy light

Interior

  • Anchor locker
  • Foredeck dodger mounting boss
  • NEW bow cushions w/removable backrests
  • Port & starboard forward seats w/108-qt. (102.21 L) insulated storage below w/gravity overboard drainage
  • 210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
  • Low-profile brushed anodized aluminum bow rails
  • 2 gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long
  • NEW aft port & starboard removable, folding jump seats
  • Molded non-skid surfaces throughout
  • NEW raw water outlet
  • Bilge access hatch
  • NEW 360° coaming bolsters
  • Five 6" (15.24 cm) polished marine-grade stainless steel cleats
  • 2 stainless steel bow chocks

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Recessed electric trim tabs
  • Factory-matched stainless steel propeller

Construction & Exterior

  • Color: MAKO® Bone White gelcoat
  • 100% composite construction
  • Coosa® Bluewater 100% composite transom core
  • Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
  • Closed-cell foam-injected stringer grid for USCG-approved flotation
  • Heavy-duty rub rail w/stainless steel insert
  • Premium marine-grade stainless steel hardware
  • Closed-molded hatch covers w/finished undersides & integrated gaskets
  • Aluminum backing plates for cleats & chocks
  • NEW swim platform w/3-step stainless steel ladder

Electrical, Mechanical & Plumbing Systems

  • High-speed raw water intake
  • USCG-compliant navigation lights
  • NEW interior courtesy lights
  • 2 cockpit courtesy lights & 1 head light
  • NEW dual battery rigging w/voltage sensitive relay (VSR) & emergency parallel switch
  • Marelon® corrosion-free seacocks on all below-water thru-hull fittings
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Optional Trailer

  • OPTIONAL tandem-axle EZ Loader® aluminum trailer available.
  • NMMA® certified.
  • DOT approved.
  • Tandem-axle brakes.
  • 14" (35.56 cm) radial tires w/galvanized V5 wheels.
  • Oil bath hubs.
  • Leaf spring suspension.
  • Heavy-duty winch w/nylon strap & safety strap.
  • Stainless steel hardware.
  • Galvanized steel components.
  • LED lighting.
  • PVC loading guides.