2018 Mako 214 CC

With its wave-crushing Deep V hull and interior creature comforts, the MAKO® 214 CC is the ideal balance of predatory performance and an on-the water recreation hub. Bow and forward console seating adds comfort for family and friends, and the optional deck filler and cushions make add a forward lounge area.
It's hard to beat the fishability of this fine boat. Storage for rods, tackle, electronics and fish is more than enough for any adventure. And there's room at the helm for at least two 12" fishfinders. All this, and it's backed by MAKO Assurance 5+Life—the best warranty in the business.

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
  • Foam-injected hull w/1-piece fiberglass stringer grid
  • Hull/deck joint chemically bonded & fastened 360° w/316 stainless steel fasteners
  • Self-bailing cockpit w/non-skid deck surface
  • Under-gunnel port & starboard rod racks for 6 rods
  • Center console w/analog gauges, large electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
  • NEW 2-tone high-density marine-grade vinyl upholstery w/ composite substrates on seats
  • 2 pedestal helm seats & forward console seat w/72-qt. insulated, drained cooler
  • Port & starboard bow seating w/108-qt. insulated fishboxes w/drains below
  • 210-qt. in-deck storage w/recess for 5-gal. bucket
  • Non-skid surface on walking flats, foredeck, gunwale tops, sole, stern platform & hatch covers

Basic Boat Info

Make: Mako
Model: 214 CC
Year: 2018
Condition: New
Category: Power
Construction: Fiberglass

Dimensions

Length: 21'5 ft
Length Overall: 21'5 ft
Beam: 8'6 ft
Max Draft: 1'2 ft
Dry Weight: 3100 lb
Deadrise: 18 deg

Tanks

Fuel Tank Capacity: 91 gal

Other

Maximum Number Of Passengers: 10
Boat Class: Center Consoles
More Info :
Additional Specs
  • Length:21' 5"
  • Beam: 8' 6"
  • Bottom width: 6' 7.5"
  • Max. recommended HP: 250 HP
  • Fuel capacity: 91 gal.
  • Max. person capacity: 10 persons
  • Max. person weight: 1700 lbs.
  • Max. person, motor & gear weight: 2550 lbs.
  • Interior depth: 27"
  • Transom height at center line: 25"
  • Deadrise: 18 degrees
  • Draft: 14"
  • Dry weight: 3735 lbs.
  • Average hull weight: 3100 lbs.
  • Average package weight: 4535 lbs.
  • Package height: 9' 3"
  • Package height w/T-top or hardtop: 11' 2"
  • Storage length: 30' 8"
Standard Features

Certification & Safety

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Stainless steel hardware & fasteners for corrosion resistance
  • CorrosionX stainless spray treatment included
  • Horn

 

Console

  • Custom anodized aluminum steering wheel w/knob
  • Binnacle-mounted motor control
  • Gauge panel w/analog gauges
  • Heavy-duty electrical switching system w/battery selector switch(es)
  • Switch panel w/manual reset circuit breakers & illuminated switches
  • Easy access to helm electronics, instruments & switches
  • Removable forward-console seat w/72-qt. (68 L) insulated, drained cooler
  • Integrated full-width footrest
  • Acrylic windscreen
  • Easy-access battery storage
  • Marine-grade tinned wiring w/submersible connectors
  • Lockable, sealed glovebox
  • Extra-large electronics mounting surface
  • 2 console drink holders

 

Construction & Exterior

  • 100% composite construction
  • Coosa® Bluewater 100% composite transom core
  • Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
  • Closed-cell, foam-injected stringer grid for USCG-approved flotation
  • Premium marine-grade stainless steel hardware
  • Heavy-duty rub rail w/stainless steel insert
  • Closed-molded hatch covers w/finished undersides & integrated gaskets
  • Aluminum backing plates for cleats, chocks & hinges
  • MAKO® Bone White gelcoat

 

Electrical, Mechanical & Plumbing Systems

  • High-speed raw water intake
  • USCG-compliant navigation lights
  • 2 cockpit courtesy lights & 1 head light
  • Marelon® corrosion-free seacocks on all below-water thru-hull fittings
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

 

Head

  • Head enclosure/storage space w/stainless steel latch

 

Interior

  • NEW 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • Top-loading anchor locker that will accommodate 12" (30.5 cm) anchor retrieval ball
  • Foredeck dodger mounting boss
  • Port & starboard bow seats w/108-qt. (102 L) fishboxes w/gravity overboard drainage
  • 210-qt. (199 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
  • Low profile brushed anodized aluminum bow rails
  • 2 gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.1 m) long
  • Port & starboard aft seats w/13-gal. (49 L) aerated baitwell below port cushion
  • Molded non-skid surfaces throughout
  • Bilge access hatch
  • Port & starboard molded-in swim platforms
  • Six 6" (15.24 cm) polished marine-grade stainless steel cleats

 

Leaning Post

  • Anodized aluminum leaning post
  • Flip-up cushion
  • Storage below
  • Rod holders

 

Optional Trailer

  • OPTIONAL tandem-axle EZ Loader® aluminum trailer available
  • NMMA® certified.
  • DOT approved.
  • Tandem-axle brakes.
  • 14" (35.6 cm) radial tires w/galvanized V5 wheels.
  • Oil bath hubs.
  • Leaf spring suspension.
  • Heavy-duty winch w/nylon strap & safety strap.
  • Stainless steel hardware.
  • Galvanized steel components.
  • LED lighting.
  • PVC loading guides.

 

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Recessed electric trim tabs
  • Factory-matched stainless steel propeller(s)

 

T-Top or Hardtop

  • Canvas T-top
  • .25" (.64 cm) aluminum backing-plate reinforcement for T-top
  • Electronics box

Contact Us


More From Mako


2024 Mako 214 CC
2024 Mako Pro Skiff 15 CC
2024 Mako Pro Skiff 17 CC
2024 Mako Pro Skiff 19 CC
2024 Mako 18 LTS